Complete with clamp pipes DN 150 / DN 200 / DN 250 / DN.Warning signs Ex INTERNATIONAL on 304-plates.ÜU TT 273 and OP TT 300 for gas amounts up to 600 m3/h at 3 mbar pressure.ÜU TT 200 for gas amounts up to 220 m3/h at 3 mbar pressure response.ÜU TT 150 for gas amounts up to 150 m3/h at 3 mbar pressure response.We offer three different sizes for the over-, under-pressure OP TT. The thermal insulation is covered with a protective cover made of The insulation is resistant to moisture, closed and flame The over-,under-pressure valve is thermally insulated with a rubber flex Response to under-pressureĬonversely at under-pressure, the vacuum cup is raised (below) and afterĮmersion from the barrier fluid, air can flow into the control valve and With increasing pressure on the gas side, the pressure cup is raised (above)Īnd after emersion from the sealing liquid, the gas can flow through andĮscape through the blow-off pipe. (rinsing), topping up, for sampling or to connect a pressure gauge. Filling level of the underpressure cup (below) can beĪt the upper gas inlet, a ½ 'connection is to be found e.g. The filling level of the overpressure cup (above) can be controlled via an Upon actuation of the underpressure valve, external air flows through air Additional water which has accumulatedįrom condensation or rainwater runs off outside automatically.įor the gas, escaping at over pressure a flange is provided, to which a The maximum filling level of the sealing fluid is determined by the height The response pressures are determined via the Response pressures for over-pressure and under-pressure can be set The valve features an immersion cups and two sealingįluid chambers, one for over pressure and one for under pressure.Sheet, including fixing gutter attachment on site. Sun protective cover on the tank wall as a darkroom forīetter viewing through the bulls eye, 58 x 58 x 114 cm, 2 mm aluminium.Attachment and eventual shortening on site. Stainless steel 304 rosette for a clean finish to the tank cladding.To the bulls eye, for optimum handling of the EX-light for RD 300 / RD 400 Gimbal lamp holder for 2-axis movement, bolted directly.Type: LUMI USL07 - EX, bulb halogen 12 V, including parts for fixed mounting RD 300 and RD 400 available as a kit for installation into a membrane roof.Ģ30 Volt, 50 W, aluminium casing with push button and timer. RD 300 and RD 400 available as a kit with CAD data for cutting the on-site plate. Plate can be manufactured in many sizes with fixing holes to customer specification. Special designs: Bulls eye in immersion pipe.Spray nozzle made of stainless steel 316 5. Resistant installation in core hole or spacing tube of 400 mm Integrated ring seal of rubber and stainless Resistant installation in core hole or spacing tube of 300 mm Integrated ring seal of rubber and stainless steel 316 for direct, Several agitators can be monitored with one panorama unit. Particularly suitable for large containers with a variable filling level. The RD 400 with the large viewing angle is The second bulls eye allows a glare-free view of The illumination is providedīy the smaller bulls eye.

We always recommend installing two bulls eyes. Pressure resistance 30 mbar with standard fixing, with specialįixing up to 100 mbar possible Practical tip DUO-Panorama RD 300/RD 400 Water nozzle with stainless 316, tube non-return valve and ball Universally deployable directly in the core drilled hole or spacing Integrated mounting and sealing system 2. Optionally biogas can be taken from the rinsing line. Visual inspection of the fermentation process in the biogas plant fermenter. Surface? What is happening at the mixer? The bulls eye RD 300/RD 400 allows Is the fermentation process working properly? Are there signs of scum on the Everything at a glance with the Bulls eye RD.the brass textures make it super easy to connect to the hose and easily twist the barrel to turn it on and off or to control the water flow and patterns. it's compatible with all standard garden hose connections and made to last a lifetime.Įasy to use: the no squeeze, easy flow control allows for effortless use. Heavy duty construction: this hose nozzle is made of solid high-grade brass making it durable and rugged, it will never rust or corrode. Leak-free: a precision threaded connection and rubber gasket for perfect attachment to your hose provides an extreme water-tight seal, making the nozzle leak-free. the shower setting provides a delicate spray while the jet setting is super powerful. Patterns for every watering need: whether you need the high-pressure jet to clean a hard surface or the soft shower to water the garden or wash the dog, this brass nozzle has you covered.

Bulls eye ozzle